| Diesel Engine | 164 kW |
| Weight | 39 t |
| Max. Torque | 165 kNm |
SF-50
The SF-50 drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Auger drilling technique.
The upper structure of the SF-50 is mounted on Soilmec base carrier and has been designed to perform:
– CFA (Continuous Flight Auger) piles by means of long auger string.
The SF-50 is equipped with the DRILLING MATE SYSTEM (DMS) on 12′ touch screen for monitoring and control of the rig performances and operating parameters.
Related products
-
BH-12
The Soilmec hydraulic grabs are the result of years of research and development in mechanical excavation. The collection of data from various sites, tests on different soil types, the study of the performance of difficult soft soils and layers allowed the production of the series of hydraulic grabs more competitive available on the market. They can operate in any soil type coarse or cohesive. In the presence of large boulders or hard conglomerate formations, we recommend the traditional chiseling.Read more -
STM 30
STM-30 is a drill unit designed to be fast, highly productive and easy to operate. It's a fully hydraulic drilling rig mounted on standard, heavy duty 6 x 4 truck. Thanks to its power, reliability and new configuration, the STM-30 meets with the needs for a high performance and easy to mobilize drilling rig. The application is: <strong>- <a href="http://www.soilmec.com/en/viewdoc.asp?co_id=3596">LDP</a></strong> deep uncased bored piles stabilized by drilling fluid or dry hole.Read more -
SH-50
The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface. Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control which is managed by the Hydromill DMS. Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time. The 50 t class module is conceived for special projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200x2000 mm in different soil conditions and at the highest depths (up to 250 m). The module rotation system is included as a standardRead more -
SH-40
The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface. Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control, which is managed by the Hydromill DMS. Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time. The 40 t class module is suggested for medium-high depth projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200x1800 mm. The high torque cutting unit (up to 153 kNm) can be installed. The module rotation system is included as a standardRead more
Reviews
There are no reviews yet.