| Panel Thickness | 800/1800 mm |
| Panel Width | 2800/3200 mm |
| Body Length | 13 m |
SH-40
The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface.
Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control, which is managed by the Hydromill DMS.
Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time.
The 40 t class module is suggested for medium-high depth projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200×1800 mm. The high torque cutting unit (up to 153 kNm) can be installed.
The module rotation system is included as a standard
Related products
-
SC- 50 HD
<strong>SC-50 HD</strong> is a Soilmec crane with an <strong>hydraulic proportional control </strong>system that provides accurate and simultaneous movements. Regarding performance, the maximum capacity is 50 tons with a working radius of about 3.6 m; the diesel engine power (201 kW) and the hoisting force (150 kN) are greater than those of the main competitors’ cranes. Another advantage is the <strong>new Soilmec cab</strong>, very comfortable for the operator and, especially, its innovative control panel. Finally, we have to highlight the different possible operating configurations (crane, hydraulic grab, cable grab, hydraulic rotary, dragline, etc.), which allow the SC-50 HD to be suitable for a large range of building yards.Read more -
SF-50
The<strong> SF-50 </strong>drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Auger drilling technique. The upper structure of the <strong>SF-50 </strong>is mounted on Soilmec base carrier and has been designed to perform: - <a href="http://www.soilmec.com/en/products/cfa_piling_rigs/viewdoc.asp?co_id=3600">CFA</a> (Continuous Flight Auger) piles by means of long auger string. The <strong>SF-50</strong> is equipped with the DRILLING MATE SYSTEM (DMS) on 12' touch screen for monitoring and control of the rig performances and operating parameters.Read more -
SC-120
The demand for diaphragm wall equipment suitable to urban areas and the stringent requirement of verticality make the hydromill Cougar a good and easy option to meet the customer’s needs. The Hose Wheels Design (HWD) is positioned below the cathead so that it can easily follow the hydromill movements with a tensioning and rewinding automatic system. It arises from the need to move simultaneously the hydraulic and bentonite mud circulation hoses to the cutting unit. The SC-120 Cougar is the high performance HWD series, which excavates more than 60 m of depth with approx. 900 HP ensuring a great level of production rates. The SC-120, complying with CE requests of EN16228 upon request, has been conceived to offer the best possible safety solutions. The equipment presents a new safe anti-falling system, handrails and ladders, lashing points, remote control boards and reduced speed mode in order to carry out the main assembly/disassembly operations and maintenance procedures in safe conditions. The DMS (Drilling Mate System), developed by Soilmec and installed on all the products of the range, allows the real-time monitoring of all the operating parameters and of the production process, including a dual-axis positioning sensor (triple-axis version as optional) that controls the geometry of the panel with 2D and 3D graphics print out.Read more -
SC-100
The demand for diaphragm wall equipment suitable to urban areas and the stringent requirement of verticality make the hydromill Cougar a good and easy option to meet the customer’s needs. The Hose Wheels Design (HWD) is positioned below the cathead so that it can easily follow the hydromill movements with a tensioning and rewinding automatic system. It arises from the need to move simultaneously the hydraulic and bentonite mud circulation hoses to the cutting unit. The SC-100 Cougar is a compact hydromill equipment optimized for urban areas and low transportation weight (max 50 t; 110,000 lb). The DMS (Drilling Mate System), developed by Soilmec and installed on all the products of the range, allows the real-time monitoring of all the operating parameters and of the production process, including a dual-axis positioning sensor (triple-axis version as optional) that controls the geometry of the panel with 2D and 3D graphics print outRead more
Reviews
There are no reviews yet.