SH-50

Call for price

The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface.

Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control which is managed by the Hydromill DMS.

Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time.

The 50 t class module is conceived for special projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200×2000 mm in different soil conditions and at the highest depths (up to 250 m).

The module rotation system is included as a standard

Categories: , , ,
Panel Thickness 1000/2000 mm
Panel Width   2800/3200 mm
Body Length 14.7 m

 

Visitors Counter : 4

Reviews

There are no reviews yet.

Be the first to review “SH-50”

Your email address will not be published. Required fields are marked *

Related products

  • GC-16

    GC serial mechanical grabs are rope suspended and rope operated. Side guides and jaws are interchangeable in order to perform different panel sizes with the same grab body.
    Read more

  • SC- 80 HD

    <strong>SC-80</strong> is a Soilmec crane with an <strong>electro-hydraulic proportional control </strong>system that provides accurate and simultaneous movements. Regarding performance, the maximum capacity is 80 tons with a working radius of about 3.5 m; the diesel engine power (205 kW) and the hoisting force (178 kN) are greater than those of the main competitors’ cranes. Another advantage is the <strong>new Soilmec cab</strong>, very comfortable for the operator and, especially, its innovative control panel. Finally, we have to highlight the different possible operating configurations (crane, hydraulic grab, cable grab, hydraulic rotary, dragline, etc.), which allow the SC-80 to be suitable for a large range of building yards.
    Read more

  • BH-12

    The Soilmec hydraulic grabs are the result of years of research and development in mechanical excavation. The collection of data from various sites, tests on different soil types, the study of the performance of difficult soft soils and layers allowed the production of the series of hydraulic grabs more competitive available on the market. They can operate in any soil type coarse or cohesive. In the presence of large boulders or hard conglomerate formations, we recommend the traditional chiseling.
    Read more

  • SR-80

    Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions. The hydraulic drilling rig <strong>SR-80</strong> has been specially designed for suiting the following applications: -<strong> LDP</strong> cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself; -<strong> LDP</strong> deep uncased bored piles stabilized by drilling fluid or dry hole; - <strong>CFA</strong> (Continuous Flight Auger) piles by means of long auger string;
    Read more