ST- 60

Call for price

ST-60 tunnelling rig project was developed to meet the growing need for sub-horizontal consolidation in large-section tunnels using single-boom equipment working with the full section method as an excellent alternative to the double-boom type system traditionally used for this type of job.
The equipment is very flexible and fast to use, also in relation to the importance of the treatments to perform. To reach the maximum heading stroke points with respect to ground level, a special system of thrust blocks and sliding blocks was designed to reach these points in total safety. The machine has a mast for 19000 mm treatments in one pass and 24000 m treatments with matching chuck and optional extensions.

The maximum extension height at 0° with respect to ground level is 10700 mm.
The variability of the height of the thrust block axis of rotation from 850 mm to 4250 mm combined with the column extension allows a work radius of from 3700 mm to 6500 mm. Tunnel lining is over 180°.
Fitted with two motors (diesel and electric) for both drilling and traversing, guaranteeing performance also in case of a breakdown of one of the two units.

The following drilling techniques can be applied using the ST-60:
– Rotation (with or without casing)
– Rotopercussion by means of Top Hammer (with or without casing)
– Rotopercussion by means of Down the Hole Hammer (with Tubex, Odex or Simmetrix superjews system)

Categories: , , ,
Diesel Engine 135+(116) kW
Max. Hoist  70 kN
Weight 60 t
Visitors Counter : 2

Reviews

There are no reviews yet.

Be the first to review “ST- 60”

Your email address will not be published. Required fields are marked *

Related products

  • SR-45

    Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions. The hydraulic drilling rig <strong>SR-45 </strong>has been specially designed for suiting the following applications: -<strong> LDP</strong> cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself; -<strong> LDP</strong> deep uncased bored piles stabilized by drilling fluid or dry hole; -<strong> LHR </strong>(Low Head Room) – large diameter bored piles; -<strong> CFA</strong> (Continuous Flight Auger) piles by means of long auger string; -<strong> DP</strong> (Displacement Piles) / <strong>TCT</strong> (traction compacting tool); -<strong> TJ</strong> (Turbojet®) /<strong> TTJ </strong>(Twin Shaft Turbojet) - soil consolidation. The <strong>SR-45</strong> is equipped with the DRILLING MATE SYSTEM (DMS) on 12' touch screen for monitoring and control of the rig performances and operating parameters.
    Read more

  • SC-120

    The demand for diaphragm wall equipment suitable to urban areas and the stringent requirement of verticality make the hydromill Cougar a good and easy option to meet the customer’s needs. The Hose Wheels Design (HWD) is positioned below the cathead so that it can easily follow the hydromill movements with a tensioning and rewinding automatic system. It arises from the need to move simultaneously the hydraulic and bentonite mud circulation hoses to the cutting unit. The SC-120 Cougar is the high performance HWD series, which excavates more than 60 m of depth with approx. 900 HP ensuring a great level of production rates. The SC-120, complying with CE requests of EN16228 upon request, has been conceived to offer the best possible safety solutions. The equipment presents a new safe anti-falling system, handrails and ladders, lashing points, remote control boards and reduced speed mode in order to carry out the main assembly/disassembly operations and maintenance procedures in safe conditions. The DMS (Drilling Mate System), developed by Soilmec and installed on all the products of the range, allows the real-time monitoring of all the operating parameters and of the production process, including a dual-axis positioning sensor (triple-axis version as optional) that controls the geometry of the panel with 2D and 3D graphics print out.
    Read more

  • SH-50

    The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface. Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control which is managed by the Hydromill DMS. Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time. The 50 t class module is conceived for special projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200x2000 mm in different soil conditions and at the highest depths (up to 250 m). The module rotation system is included as a standard
    Read more

  • STM 20

    <strong>STM-20</strong> is a drill unit designed to be fast, highly productive and easy to operate. It's a fully hydraulic drilling rig mounted on standard, heavy duty truck.  Thanks to its power, reliability, and novel configuration STM-20 meets the needs for a highly capable, easily mobilized drilling rig. The application is: <strong>- <a href="http://www.soilmec.com/en/products/piling_rigs/viewdoc.asp?co_id=3596">LDP</a></strong> deep uncased bored piles stabilized by drilling fluid or dry hole.
    Read more