| Max. Diameter | 3000 mm |
| Max. Depth | 80 m |
| Max. Torque | 210 kNm |
RT3-ST
RT3-ST model allows to drill holes of diameters from 600 to 2500 mm to various depths up to 80 m.
Some unique features of design and construction give the machine a high degree of efficiency and reliability:
– 185 HP, GM 4-53T diesel engine with ZF 4WG181 torque converter
– 3-roller table, with forced lubrication system and damping mounting through teflon rigs
– 16 ton pull down system through two 760 mm stroke hydraulic jacks
– fully detachable basic frame and subframe for ease of transport
– special steel Kelly bars with throughout welded extruded driving ribs
– intake air filter
Related products
-
SC- 50 HD
<strong>SC-50 HD</strong> is a Soilmec crane with an <strong>hydraulic proportional control </strong>system that provides accurate and simultaneous movements. Regarding performance, the maximum capacity is 50 tons with a working radius of about 3.6 m; the diesel engine power (201 kW) and the hoisting force (150 kN) are greater than those of the main competitors’ cranes. Another advantage is the <strong>new Soilmec cab</strong>, very comfortable for the operator and, especially, its innovative control panel. Finally, we have to highlight the different possible operating configurations (crane, hydraulic grab, cable grab, hydraulic rotary, dragline, etc.), which allow the SC-50 HD to be suitable for a large range of building yards.Read more -
SH-40
The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface. Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control, which is managed by the Hydromill DMS. Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time. The 40 t class module is suggested for medium-high depth projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200x1800 mm. The high torque cutting unit (up to 153 kNm) can be installed. The module rotation system is included as a standardRead more -
SF-50
The<strong> SF-50 </strong>drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Auger drilling technique. The upper structure of the <strong>SF-50 </strong>is mounted on Soilmec base carrier and has been designed to perform: - <a href="http://www.soilmec.com/en/products/cfa_piling_rigs/viewdoc.asp?co_id=3600">CFA</a> (Continuous Flight Auger) piles by means of long auger string. The <strong>SF-50</strong> is equipped with the DRILLING MATE SYSTEM (DMS) on 12' touch screen for monitoring and control of the rig performances and operating parameters.Read more -
SC- 80 HD
<strong>SC-80</strong> is a Soilmec crane with an <strong>electro-hydraulic proportional control </strong>system that provides accurate and simultaneous movements. Regarding performance, the maximum capacity is 80 tons with a working radius of about 3.5 m; the diesel engine power (205 kW) and the hoisting force (178 kN) are greater than those of the main competitors’ cranes. Another advantage is the <strong>new Soilmec cab</strong>, very comfortable for the operator and, especially, its innovative control panel. Finally, we have to highlight the different possible operating configurations (crane, hydraulic grab, cable grab, hydraulic rotary, dragline, etc.), which allow the SC-80 to be suitable for a large range of building yards.Read more
Reviews
There are no reviews yet.