<ul>
<li>COMPLETE RANGE</li>
<li>ANTICRASH MATERIAL</li>
</ul>
Read more
<strong>SM-4</strong> is a new drilling machine featuring a <strong>separate power pack</strong> and the same movements of its larger sister, the SM-5. It has two different engine sizes available: 115 kW and 110 kW respectively (diesel and electrical).
Among the many options the most interesting one is certainly the <strong>LHR kit </strong>(Low Head Room) suitable for 600 mm diameters auger drilling, with cased pilot hole.
Read more
<strong>SM-4</strong> is a new drilling machine featuring a <strong>separate power pack</strong> and the same movements of its larger sister, the SM-5. It has two different engine sizes available: 115 kW and 110 kW respectively (diesel and electrical).
Among the many options the most interesting one is certainly the <strong>LHR kit </strong>(Low Head Room) suitable for 600 mm diameters auger drilling, with cased pilot hole.
Read more
The<strong> new SM-5</strong> is a compact drill rig weighting 5.6 tons, available both with a combined kinematic mechanism that includes a telescopic arm, a +/- 90° tilting and a slew ring on mast (standard version), and in the <strong>G version</strong> that features a fixed kinematic mechanism and coring rotary, for soil-investigation.
The significant installed power, 72 kW, achieves high performance despite small dimensions, thanks to a wide rotary selection with torque values ranging between 690 daNm and 2100 daNm.
Read more
The<strong> new SM-5</strong> is a compact drill rig weighting 5.6 tons, available both with a combined kinematic mechanism that includes a telescopic arm, a +/- 90° tilting and a slew ring on mast (standard version), and in the <strong>G version</strong> that features a fixed kinematic mechanism and coring rotary, for soil-investigation.
The significant installed power, 72 kW, achieves high performance despite small dimensions, thanks to a wide rotary selection with torque values ranging between 690 daNm and 2100 daNm.
Read more
Designed mainly for geognostic use, it can be used for vertical drilling micropiles or inclined ± 13°.
<strong>Main features:</strong>
- Rotation head with 6 ratio gearbox
- Fixed kinetic mechanism
<strong>Optional: </strong>
- Jet-Grouting kit for treatments up to 12 m
- Mud pump screw type and triplex type fitted on board
- Wire-line winch
- Slew ring for inclinated drilling holes
Read more
<strong>The SM-10 is a multipurpose drilling rig</strong>. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain, water wells. The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble free even in the hardest working conditions.
Thanks to a particular kinematic mechanism (composed of: 650 mm extendable boom, swivelling ± 10°, joint 90° and the optional motoreducer slew ring for radial drilling) the <strong>SM-10 is a versatility unit that can be tailored to any customer need or geological conditions</strong>.
<strong>The SM-10 may be further tailored with a wide range of optional items such as: </strong>
- Jet grouting kit
- Mud pump (screw type fitted on board, triplex type for external use only)
- Top Hammer
- Rod carousel
- Slew ring < for radial drilling
- Radio operated remote control
Read more
<strong>The SM-10 is a multipurpose drilling rig</strong>. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain, water wells. The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble free even in the hardest working conditions.
Thanks to a particular kinematic mechanism (composed of: 650 mm extendable boom, swivelling ± 10°, joint 90° and the optional motoreducer slew ring for radial drilling) the <strong>SM-10 is a versatility unit that can be tailored to any customer need or geological conditions</strong>.
<strong>The SM-10 may be further tailored with a wide range of optional items such as: </strong>
- Jet grouting kit
- Mud pump (screw type fitted on board, triplex type for external use only)
- Top Hammer
- Rod carousel
- Slew ring < for radial drilling
- Radio operated remote control
Read more
The new<strong> SM-10GT</strong> is a hydraulic drilling rig designed specifically for geothermal drilling.
The fixed kinematic mechanism, wide section mast, and the pull-push system with a 120 kN hydraulic cylinder means drilling deep, precise bores.
The rubber tracked undercarriage and low specific pressure on the ground make this machine ideal for operating in gardens and private courtyards, typical in this kind of application, reducing the impact of the site.
The drilling rig has a hydraulic clamp and breaker suitable for breaking drilling rods and an additional support for manoeuvres during feeding and recovery of the casings.
The drilling battery loading (rods and casings) is fast and safe thanks to a special winch system with magnetic lifting.
Read more
<strong>The SM-12 is a multipurpose drilling rig</strong>. Its modular design is engineered for the execution of: micropiles, jet-grouting, water wells, cfa. The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble free even in the hardest working conditions.
Thanks to the new design, it is very easy to make maintenance. Thanks to the full radio the operator can work in total safety.
Thanks to a fixed kinematic mechanism <strong>SM-12 </strong>is a versatility unit specialized for CFA, that can be tailored to any customer need or geological conditions.
The <strong>SM-12</strong> may be further tailored with a wide range of optional items such as:<strong> </strong>
- Mud pump
- Top Hammer
- Several range of rotary head
Read more
<strong>The SM-12 is a multipurpose drilling rig</strong>. Its modular design is engineered for the execution of: micropiles, jet-grouting, water wells, cfa. The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble free even in the hardest working conditions.
Thanks to the new design, it is very easy to make maintenance. Thanks to the full radio the operator can work in total safety.
Thanks to a fixed kinematic mechanism <strong>SM-12 </strong>is a versatility unit specialized for CFA, that can be tailored to any customer need or geological conditions.
The <strong>SM-12</strong> may be further tailored with a wide range of optional items such as:<strong> </strong>
- Mud pump
- Top Hammer
- Several range of rotary head
Read more
<strong>Soilmec SM-14 is a multipurpose drilling rig</strong>. Its modular design is engineered for the execution of:
Micropiles, Tie-backs, Jet-grouting, Drain, Water wells.
The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth. Featured with Load Sensing System, it has lower running costs and a reduced wear and tear on components.
<strong>Soilmec SM-14 versatility unit that can be tailored to any customer need or geological conditions</strong>.
Available with a wide range of rotary heads ranging from 800 daNm to 2500 daNm (special attachment for each HR are available).
<strong>SM-14 may be further tailored with a wide range of optional items such as:</strong>
- Jet-grouting kit for mono, bi or three fluids treatment for ø 114 mm rods (ø 127 mm with special kit)
- Kinematic motion 90° mast articulation for tie-back and anchoring drilling (twin cylinders)
- Mast rotation by gearmotor for ± 180°
- Service crane for handling of drilling rods and for rods & casing
- Designed for working with carousel
- Special mast stroke: 1500 - 1800 - 2100 - 3000 - 7000 mm
- Radio operated remote control
- Rod carousel 10x114 mm
- Double rotary head
- Grout pumps
- Mud pump
<strong>Several hydraulic rotary available with different regulation torque.</strong>
Read more
