Specific equipment for Soil Investigation, designed for deep core drilling.
The high pull/push values and the high hydraulic power installed lets you use fast rotary speeds (over 1000 rpm) for conventional and wire-line diamond core drilling to great depths.
<strong>Main features:</strong>
- Rotary head with 6-speed transmission (maximum speed: 1000 rpm)
- Fixed kinematic mechanism
- Extraction capacity: 19500 kg
- Hydraulic balancing
<strong>Optional devices:</strong>
- Triplex mud pumps 185/45 bar
- Wire-line winch, 800 m rope capacity
- Thrust block with pistons for inclined drilling
- Jet-grouting kit
- Double rotary
Read more
<strong>SM-16GT </strong>responds to the demand of geothermal systems drilling between 100 and 250 metres.
The equipment's characteristics mean it can satisfy 70% of demand from the low-enthalpy geothermal sector. The compact drilling rig has a rubber tracked, 2300 mm-wide carriage and very low ground bearing pressure (0.65 Kg/cm2), thereby minimising damage to private property (gardens and courtyards) where domestic geothermal energy is used.
The drilling rig is equipped with fixed kinematic mechanism with a wide section mast, half-cylinder pull/push and a 19.5 ton pull capacity and 9.8 ton push power.
The rig is designed for rapid manoeuvring (0.2÷0,6 m/sec) and has a 200 kW, 2400 rpm diesel engine adapted to power the double rotary (upper 1100 daNm - bottom 3200 daNm), triple clamp and magnetic loading system to simultaneously manoeuvre rods/casings.
To keep weight to a minimum the drilling rig is not fitted with heavy and bulky casing/rod storage and is instead accompanied by an autonomous motorised rack system during operation.
Read more
Soilmec<strong> SM-17</strong> is a multipurpose drilling rig developed from the fusion of TREVI GROUP job-site experience and SOILMEC technological research, thus perfectly responding to the needs of professionals worldwide.
Its modular design is engineered for the execution of: Micropiles, Tie-backs, Anchors, Jet Grouting and Mini-piles.
<strong>Standard Equipment </strong>
- Oscillating undercarriage
- Diesel power pack: 160 kW
- Heavy Duty mast 4.8 m stroke
- Cradle with side shifting
- Rotary head: 1400 daNm
- Clamping range 50-315 mm
- Full radio remote control
<strong>Optional Equipment</strong>
- Modular mast up to 10 m stroke
- Rotary head up to 3700 daNm
- Extractor device
- Rod loader 3x6 m - 3x10 m
- Jet Grouting Kit: 20 m
- Top Hammer Soilmec / Eurodrill /Krupp
- Double rotary head
- Foam pump
- Water/mud pump
- Service winch
Read more
Soilmec<strong> SM-17</strong> is a multipurpose drilling rig developed from the fusion of TREVI GROUP job-site experience and SOILMEC technological research, thus perfectly responding to the needs of professionals worldwide.
Its modular design is engineered for the execution of: Micropiles, Tie-backs, Anchors, Jet Grouting and Mini-piles.
<strong>Standard Equipment </strong>
- Oscillating undercarriage
- Diesel power pack: 160 kW
- Heavy Duty mast 4.8 m stroke
- Cradle with side shifting
- Rotary head: 1400 daNm
- Clamping range 50-315 mm
- Full radio remote control
<strong>Optional Equipment</strong>
- Modular mast up to 10 m stroke
- Rotary head up to 3700 daNm
- Extractor device
- Rod loader 3x6 m - 3x10 m
- Jet Grouting Kit: 20 m
- Top Hammer Soilmec / Eurodrill /Krupp
- Double rotary head
- Foam pump
- Water/mud pump
- Service winch
Read more
Soilmec<strong> SM-18</strong> is a multipurpose drilling rig developed from the fusion of TREVI GROUP job-site experience and SOILMEC technological research, thus perfectly responding to the needs of professionals worldwide.
Its modular design is engineered for the execution of: Micropiles, Tie-backs, Anchors, Jet Grouting and Mini-piles.
The load-sensing control system on hydraulic power, the 500 l/min oil flow given by twin piston pumps and the higher speed on any drilling movements, makes Soilmec SM-18 as the faster rig of micropiles sector.
<strong>Standard Equipment </strong>
- Hydraulic and proportional controls
- Remote control board of each functions for finding the best working position in any condition
- Noise reduction
- Innovative emergency stop for drilling functions, safety light for active drilling mode, telescopic counterweight and telescopic stabilizer for increased stability, easier maintenance c/w faster fault checks
- Variable speed or 4-speeds gaer box rotary head
- Twin rotaries or Overburden drilling system
- Vibrorotary or Sonic applications
- Reverse circulation
Read more
Soilmec<strong> SM-18</strong> is a multipurpose drilling rig developed from the fusion of TREVI GROUP job-site experience and SOILMEC technological research, thus perfectly responding to the needs of professionals worldwide.
Its modular design is engineered for the execution of: Micropiles, Tie-backs, Anchors, Jet Grouting and Mini-piles.
The load-sensing control system on hydraulic power, the 500 l/min oil flow given by twin piston pumps and the higher speed on any drilling movements, makes Soilmec SM-18 as the faster rig of micropiles sector.
<strong>Standard Equipment </strong>
- Hydraulic and proportional controls
- Remote control board of each functions for finding the best working position in any condition
- Noise reduction
- Innovative emergency stop for drilling functions, safety light for active drilling mode, telescopic counterweight and telescopic stabilizer for increased stability, easier maintenance c/w faster fault checks
- Variable speed or 4-speeds gaer box rotary head
- Twin rotaries or Overburden drilling system
- Vibrorotary or Sonic applications
- Reverse circulation
Read more
The new <strong>SM-22</strong> is an evolution of the historic PSM-1350 and SM-20 models and have been completely redesigned to ensure high efficiency and productivity levels on site together with the highest safety standards.
The new <strong>SM-22</strong> can be easily configured in different single rotary fittings, double rotary, top-hammer and vibro-rotary to carry out consolidation, micropiles and anchors with different drilling technologies, direct circulation, reverse circulation, DTH, CFA, jet grouting.
The rig is powered by a Diesel unit that allows to satisfy the standards need in all the markets (both Tier3 and Tier4f are available), while ensuring at the same time a low environmental impact due to reduced noise, consumption and emissions.
Especially designed to ensure the operator’s safety with new full radio control that guarantee high performances at the jobsite. Flexibility, reliability and safety characterize the new <strong>SM-22</strong> and make it a multifunctional and versatile rig, thus offering the best technological solution for micro/mini drilling.
Read more
The new <strong>SM-22</strong> is an evolution of the historic PSM-1350 and SM-20 models and have been completely redesigned to ensure high efficiency and productivity levels on site together with the highest safety standards.
The new <strong>SM-22</strong> can be easily configured in different single rotary fittings, double rotary, top-hammer and vibro-rotary to carry out consolidation, micropiles and anchors with different drilling technologies, direct circulation, reverse circulation, DTH, CFA, jet grouting.
The rig is powered by a Diesel unit that allows to satisfy the standards need in all the markets (both Tier3 and Tier4f are available), while ensuring at the same time a low environmental impact due to reduced noise, consumption and emissions.
Especially designed to ensure the operator’s safety with new full radio control that guarantee high performances at the jobsite. Flexibility, reliability and safety characterize the new <strong>SM-22</strong> and make it a multifunctional and versatile rig, thus offering the best technological solution for micro/mini drilling.
Read more
The <strong>SM-28</strong> is a multipurpose rig that suits a wide range of civil engineering work requirements. High standard components and advanced hydraulic circuit design have enabled increased rig performance, preserving its reliability, even under extreme conditions. Its smart and compact de-sign allows fast rig assem-bly and ease of transport (even in a container). Minimum operating costs.
<strong>Soilmec SM-28 versatility unit that can be tailored to any customer need or geological conditions:</strong>
- Top hammer kit
- Jet Grouting kit
- CFA kit
- Double rotary
- Rod carousel
- Clamp & guide for CFA
- 13500 mm feed stroke
- Mast tilting until 18°
<strong>Soilmec SM-28 standard version is already equipped with some important items:</strong>
- Drill mast 16000 mm stroke
- Clamp and breaker 40-320 mm
- Service winch
Read more
The <strong>SM-28</strong> is a multipurpose rig that suits a wide range of civil engineering work requirements. High standard components and advanced hydraulic circuit design have enabled increased rig performance, preserving its reliability, even under extreme conditions. Its smart and compact de-sign allows fast rig assem-bly and ease of transport (even in a container). Minimum operating costs.
<strong>Soilmec SM-28 versatility unit that can be tailored to any customer need or geological conditions:</strong>
- Top hammer kit
- Jet Grouting kit
- CFA kit
- Double rotary
- Rod carousel
- Clamp & guide for CFA
- 13500 mm feed stroke
- Mast tilting until 18°
<strong>Soilmec SM-28 standard version is already equipped with some important items:</strong>
- Drill mast 16000 mm stroke
- Clamp and breaker 40-320 mm
- Service winch
Read more
<strong>The SM-9 is a multipurpose drilling rig</strong>. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain, water wells. The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble free even in the hardest working conditions.
Thanks to a particular kinematic mechanism (composed of: 650 mm extendable boom, swivelling ± 29°, joint 90° and the optional motoreducer slew rig for radial drilling) the <strong>SM-9 is a versatility unit that can be tailored to any customer need or geological conditions</strong>.
<strong>The SM-9 may be further tailored with a wide range of optional items such as: </strong>
- Jet grouting kit
- Mud pump (screw type fitted on board, triplex type for external use only)
- Top Hammer
- Rod carousel
- Slew ring < for radial drilling
- Radio operated remote control
Read more
<strong>The SM-9 is a multipurpose drilling rig</strong>. Its modular design is engineered for the execution of: micropiles, tie-backs, jet-grouting, coring, drain, water wells. The rig is fitted with proportional, hydraulic servo-assisted controls that make the operations smooth and trouble free even in the hardest working conditions.
Thanks to a particular kinematic mechanism (composed of: 650 mm extendable boom, swivelling ± 29°, joint 90° and the optional motoreducer slew rig for radial drilling) the <strong>SM-9 is a versatility unit that can be tailored to any customer need or geological conditions</strong>.
<strong>The SM-9 may be further tailored with a wide range of optional items such as: </strong>
- Jet grouting kit
- Mud pump (screw type fitted on board, triplex type for external use only)
- Top Hammer
- Rod carousel
- Slew ring < for radial drilling
- Radio operated remote control
Read more
