Deviation-Inclination

Call for price

nspired by the technology used by oil rig directional drilling, the TIGOR is an instrumented drilling rod comprising deviation measurement sensors, onboard electronics and batteries. The assembly, available in 2 versions, the single fluid and the double fluid, consists of a 1 metre long non-magnetic rod.

TIGOR single fluid: Available in diameters 89 and 114, the TIGOR has a central tube that carries the drilling fluid or the high pressure slurry.

TIGOR double fluid : Available in diameters 127 and 139, the TIGOR double fluid has a central tube that carries the drilling fluid or the high pressure slurry and also a lateral pipe conveying air.
Regardless of version, the TIGOR always includes sensors for measuring the inclinations in two perpendicular planes and the azimuth in relation to the magnetic North.

Categories: , , ,

 IA1620

The inclination sensor provides the angle of inclination from the vertical in two perpendicular planes. In the standard IA1620 version, the cable is fed out through a gland box. The cable is fed out from a sealed connector for the IA16120 submersible version.

IG1690

The inclination sensor provides the angle of inclination from the vertical in two perpendicular planes. In the IG16V90 version, the cable is fed out through a gland box. The cable is fed out from a sealed connector for the IG16VI90 submersible version. When the support is subject to vibration or major impact, preference should be given to the IG1690 sensor over the IA1620 version.

NEMO

The NEMO-K sensor contains the series of cable grab deviation measurement sensors (two for traversing and one for rotation). The NEMO-K sensor is equipped with a data transmission radio transmitter that can be recharged using a charger (KACH).

TIGOR

Inspired by the technology used by oil rig directional drilling, the TIGOR is an instrumented drilling rod comprising deviation measurement sensors, onboard electronics and batteries. The assembly, available in 2 versions, the single fluid and the double fluid, consists of a 1 metre long non-magnetic rod.

TIGOR single fluid: Available in diameters 89 and 114, the TIGOR has a central tube that carries the drilling fluid or the high pressure slurry.

TIGOR double fluid : Available in diameters 127 and 139, the TIGOR double fluid has a central tube that carries the drilling fluid or the high pressure slurry and also a lateral pipe conveying air.
Regardless of version, the TIGOR always includes sensors for measuring the inclinations in two perpendicular planes and the azimuth in relation to the magnetic North.

PRAD

The PRAD is a ground, mud or concrete pressure measurement sensor and deviation measurement sensor for continuous flight auger, Kelly pile and SoilMixing applications.

Visitors Counter : 5

Reviews

There are no reviews yet.

Be the first to review “Deviation-Inclination”

Your email address will not be published. Required fields are marked *

Related products

  • SC- 80 HD

    <strong>SC-80</strong> is a Soilmec crane with an <strong>electro-hydraulic proportional control </strong>system that provides accurate and simultaneous movements. Regarding performance, the maximum capacity is 80 tons with a working radius of about 3.5 m; the diesel engine power (205 kW) and the hoisting force (178 kN) are greater than those of the main competitors’ cranes. Another advantage is the <strong>new Soilmec cab</strong>, very comfortable for the operator and, especially, its innovative control panel. Finally, we have to highlight the different possible operating configurations (crane, hydraulic grab, cable grab, hydraulic rotary, dragline, etc.), which allow the SC-80 to be suitable for a large range of building yards.
    Read more

  • SR-30

    Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions. The hydraulic drilling rig SR-30 has been specially designed for suiting the following applications: - LDP cased bore piles with casing driven directly by rotary head; - LDP deep uncased bored piles stabilized by drilling fluid or dry hole; - LHR (Low Head Room) – large diameter bored piles; - CFA (Continuous Flight Auger) piles by means of long auger string. The SR-30 is equipped with the DRILLING MATE SYSTEM (DMS) on 12' touch screen for monitoring and control of the rig performances and operating parameters.
    Read more

  • SH-40

    The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface. Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control, which is managed by the Hydromill DMS. Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time. The 40 t class module is suggested for medium-high depth projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200x1800 mm. The high torque cutting unit (up to 153 kNm) can be installed. The module rotation system is included as a standard
    Read more

  • SR-80

    Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions. The hydraulic drilling rig <strong>SR-80</strong> has been specially designed for suiting the following applications: -<strong> LDP</strong> cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself; -<strong> LDP</strong> deep uncased bored piles stabilized by drilling fluid or dry hole; - <strong>CFA</strong> (Continuous Flight Auger) piles by means of long auger string;
    Read more