| Product | Pipe handled | Max Break Up Torque | Max Break Out Torque | Spinning Speed |
|---|---|---|---|---|
| inch | lb*ft | lb*ft | rpm | |
| PCT-80 | from 2 7/8 to 8 1/2 | 60000 | 80000 | 100 |
| PCT-130 | from 3 1/2 to 11 | 110000 | 132000 | 100 |
| PCT-100 (on Request) | from 2 7/8 to 8 1/2 | 88000 | 100000 | 100 |
PCT – Compact Power Tong
DRILLMEC’s Compact Power Tong is able to offer high torque performances with very quick operations.
Drillmec PCT system, consist mainly of:
- Set of hydraulic cylinders for vertical and horizontal power tong moving
- Spinning system
- Pedestral/Positioning
- Rotating clamps
PCT Series Main features
- Can be installed directly on rig floor through a pedestal, can be powered by a Hydraulic Power Unit (stand alone system) or by the auxiliary rig’s HPU.
- Controls are located in the driller cabin and on the drill floor, connected to the PCT by cables, allowing remote operation handling at safe distance
PCT Series Main Benefits:
- Controls positioned on the handling arm frame available in case of emergency
- Easy installation and handling procedure, two pad eyes rated 17 ton each top mounted for lifting operations
- Equipped with one limit switch that stops upper clamp rotation during make-up phase
- High torque performance and wide OD range availability
Related products
-
-
Pipe Handling Equipment
Every rig operator is looking for greater efficiency and safer operations at the same time. Drillmec automated Pipe Handling Equipment accomplishes both in easy to operate and extremely reliable equipment. Power Catwalk & Pipe Shuttle Power Catwalk / Pipe Shuttle are the devices used for moving tubulars in complete safety from pipe racks to drill floor. Bridge Crane Racker Bridge Crane Racker is mounted on runway beams installed inside of the derrick, over the racking area. The lifting arm, equipped with a clamp, can be extended into the path of the traveling equipment and can handle various tubular sizes. The arm is equipped with a safety shear pin and safety cable to prevent damage should a collision occur. The racker can move the tubulars from racking board to well center, and viceversa. The bridge, 200 degree slewing and trolley functions are driven by rack and pinion drives and powered by rig hydraulic power. The control panels will be integrated into: derrick man cabin, driller’s control panel and driller’s assistant control panel. The Bridge Racker controls are configured such that the Racker can be run from a joystick controller on the derrick man control cabin or manually with the manually operated hydraulic controls in the derrick man control cabin, should there be any problems with the electrical controls. The system will be furnished with a complete zone management system to prevent collision between handler elements and travelling equipment. The Bridge Racker uses electrical components suitable for operation in Zone 2.Read more -
Rotary table
<div class="first column"> Drillmec rotary table is designed for rough conditions and complies with the strictest approvals for the drilling industry. Drillmec’s rotary table “R Type” are designed, in accordance with the industry standards, for drilling depths up to 30,000 FT and beyond. Driven by electric or hydraulic power, “R Type” are interchangeable with the most popular rotary table brands. </div> <div class="last column"> <p class="split">Drillmec’s quality department inspects all phases of manufacture and every item is tested in our premesis before delivery.</p> </div>Read more -
SGT Dredging Units
1- Heavy-duty horizontal centrifugal dredging pumps manufactured from wear-resistant ni-hard and manganese steel. – Extremely efficient – Wear resistant – Long working life – Easy disassembly – Limited maintenance – Ready availability of spare parts – Single and double-walled versionsRead more
Reviews
There are no reviews yet.