PREVO

Call for price

The PREVO is a Volume Pressure Regulator (CPV in French) used for measuring ground geomechanical properties according to the cylindrical cavity expansion principle. Powered by a compressed air cylinder and the auger machine’s battery, the PREVO servo valves automatically adjust test pressure levels. The stress applied (on and between the main bearings) is perfectly controlled by the PREVO operating as a closed loop.

Stress maintenance is perfectly controlled, independently of the reaction of the ground being stressed. The stressing procedure (plateau, duration) is controlled by the operator or automatically by the BAP160 (or the LUBAP) connected to the PREVO (e.g. according to the stipulations of the NF P 94-110 / EN ISO 22476-4 standard). In this configuration, controlled by the BAP160 or the LUBAP, the PREVO performs the test according to the programmed procedure in automatic or manual mode as selected by the operator. The pressure, volume and time measurements recorded are exploited on a PC by the software EXPRS.

[button link=”https://www.youtube.com/watch?v=wb7arp7zgRo” type=”big” color=”lightblue” newwindow=”yes”] Watch Video[/button]

 

Categories: , ,
Power Supply: 9 – 36 VDC, 24 AC Weight: 27 kg (PREVO), 24 kg (PREVO100)
Dimensions (PREVO): 310 x 700 x 380 mm Dimensions: (PREVO100): 260 x 520 x 360 mm
Temperature range: -20C / +75C Geotechnical test recording with BAP160 or the LUBAP

 

 

Reviews

There are no reviews yet.

Be the first to review “PREVO”

Your email address will not be published. Required fields are marked *

Related products

  • BH-8

    The Soilmec hydraulic grabs are the result of years of research and development in mechanical excavation. The collection of data from various sites, tests on different soil types, the study of the performance of difficult soft soils and layers allowed the production of the series of hydraulic grabs more competitive available on the market. They can operate in any soil type coarse or cohesive. In the presence of large boulders or hard conglomerate formations, we recommend the traditional chiseling.
    Read more

  • SH-50

    The hydromill module is constituted by a heavy steel frame on which two milling drums and a centrifugal mud pump are mounted. In order to correct the module verticality deviation, 12 independent mobile flaps are positioned on the module surface. Furthermore, a simultaneous or independent tilting plate can be installed as optional for the best verticality correction, especially in case of leaned layers of rock. All Soilmec modules are set with a 2D or 3D sensor developed for the module positioning control which is managed by the Hydromill DMS. Soilmec has designed all its modules with a rotation system conceived for T-panel execution or for other module orientations. This specific feature gives the possibility to facilitate the job site operations, leading to a reduction in terms of cost and time. The 50 t class module is conceived for special projects. Its body length and weight guarantee a high verticality level and panel dimensions up to 3200x2000 mm in different soil conditions and at the highest depths (up to 250 m). The module rotation system is included as a standard
    Read more

  • SC- 50 HD

    <strong>SC-50 HD</strong> is a Soilmec crane with an <strong>hydraulic proportional control </strong>system that provides accurate and simultaneous movements. Regarding performance, the maximum capacity is 50 tons with a working radius of about 3.6 m; the diesel engine power (201 kW) and the hoisting force (150 kN) are greater than those of the main competitors’ cranes. Another advantage is the <strong>new Soilmec cab</strong>, very comfortable for the operator and, especially, its innovative control panel. Finally, we have to highlight the different possible operating configurations (crane, hydraulic grab, cable grab, hydraulic rotary, dragline, etc.), which allow the SC-50 HD to be suitable for a large range of building yards.
    Read more

  • SR-30

    Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions. The hydraulic drilling rig SR-30 has been specially designed for suiting the following applications: - LDP cased bore piles with casing driven directly by rotary head; - LDP deep uncased bored piles stabilized by drilling fluid or dry hole; - LHR (Low Head Room) – large diameter bored piles; - CFA (Continuous Flight Auger) piles by means of long auger string. The SR-30 is equipped with the DRILLING MATE SYSTEM (DMS) on 12' touch screen for monitoring and control of the rig performances and operating parameters.
    Read more