UAG Kelly Bars

UAG Kelly Bars

Call for price

Kelly bar is a component of rotary drilling rig which is used when the rig is being used in Kelly drilling configuration. Kelly bars main purpose is to transfer the torque of the rotary drive and crowd pressure of the crown system to the drilling tool. UAG  is manufacturing Kelly Bars in various configuration depending upon machine model, rotating torque and customer demand. Normally Kelly bars made of 2 to 5 tubular sections with drive keys and lock recesses on each section.

There are mainly two types of Kelly Bars

  1.  Interlocking Kelly Bars
  2.  Friction Kelly Bars
Categories: ,

KELLY BARS IDENTIFICATION

Identification number for Kelly bars provides information about Kelly type, Nominal Torque, Outer pipe diameter, No. of Kelly bars sections and Nominal Drilling Depth. In ID No. ‘UAG’ Stands for Universal Augers Gulf, ‘I’ stands for Interlocking, ‘F’ Stands for Friction and ‘K’ Stands for Kelly Bar.

  • UAGIK Torque/Dia./Sections/Depth
  • UAGFK Torque/Dia./Sections/Depth

INTERLOCKING KELLY BARS

Interlocking Kelly bars are used with rotary rigs for drilling in dense sand & gravel and weak to strong rock. UAG is manufacturing fully lockable Interlocking Kelly Bars with mechanical locking system on each section. Specially selected steel pipes and use of special steel drive keys and locks are the key features of UAG  Kelly bars. Specially designed springs are being used for shock absorbing.

FRICTION KELLY BARS:

Friction Kelly bars are used with rotary rigs for drilling in silt, clay and loose dense sand & gravel. UAG is manufacturing non-lockable friction Kelly Bars with drive keys on each section. Specially selected steel pipes and use of special steel for drive keys are the key features of UAG Kelly bars; specially designed springs are being used for shock absorbing.

Sr No Outer Diameter (mm) Nominal Length (mm) No of Sections Nominal Torque (KN-m) Nominal Drilling Depth (mm) Drilling Rigs Macthed with
1 630 10¬25 4 or 5 600 36¬120 SR, XCMG, Sany, Yutong
2 575 10¬21 4 or 5 500 36¬100 SR, XCMG, Sany, Yutong, Sunward
3 559 10¬21 4 or 5 500 36¬100 SR, Bauer
4 530 10¬20 4 or 5 360 36¬95 Zoomlion, SR
5 508 10¬18 3 or 4 280, 360 28¬70 SR, XCMG, Sany, Yutong, Sunward, Zoomlion, Casagrande
6 470 10¬25 3 or 4 280, 400 28¬95 SR, XCMG, Sany, Yutong, Sunward, Bauer
7 470 10¬16.5 5 280 28¬78 SR, XCMG, Sany, Yutong, Sunward
8 440 10¬15 3 or 4 250 28¬56 Mait, Sunward, Sany, Yutong, SR, Zoomlion, XCMG
9 426 10¬15 3 or 4 250 28¬56 CMV, IMT, Casagrande, XCMG
10 419 10¬15 3 or 4 250 28¬56 CMV, IMT, Casagrande, XCMG
11 406 10¬15 3 or 4 230 28¬56 CMV, XCMG, Zoomlion
12 406 10¬15 3 or 4 300 28¬56 Soilmec, Bauer
13 394 10¬16 3 360 28¬45 Bauer
14 394 10¬17 4 280 28¬65 Bauer
15 377 10¬14 3 or 4 220 28¬54 Bauer, Mait
16 368 10¬14 3 or 4 220 28¬54 Bauer, Mait
17 355 10¬13 3 or 4 140 28¬50 CMV, Soilmec, NSR, XCMG, Yutong
18 340 (343) 10¬13 3 or 4 230 28¬50 Bauer
19 299 10¬13 3 or 4 140 28¬50 Bauer, Soilmec

No matter what Machine Type you have, You Can Find A Perfect Solution At Universal Augers Gulf FZCO.  Our Tailored-Made High Quality Kelly Bars Can Be Applied To Any Drilling Rig Available in the Market, Including but are Not Limited To Listed As Below

 

 

Visitors Counter : 2

Reviews

There are no reviews yet.

Be the first to review “UAG Kelly Bars”

Your email address will not be published. Required fields are marked *

Related products

  • SC- 50 HD

    <strong>SC-50 HD</strong> is a Soilmec crane with an <strong>hydraulic proportional control </strong>system that provides accurate and simultaneous movements. Regarding performance, the maximum capacity is 50 tons with a working radius of about 3.6 m; the diesel engine power (201 kW) and the hoisting force (150 kN) are greater than those of the main competitors’ cranes. Another advantage is the <strong>new Soilmec cab</strong>, very comfortable for the operator and, especially, its innovative control panel. Finally, we have to highlight the different possible operating configurations (crane, hydraulic grab, cable grab, hydraulic rotary, dragline, etc.), which allow the SC-50 HD to be suitable for a large range of building yards.
    Read more

  • SC-135 HD

    With the aim of meeting the need for increased diaphragm wall depth in the most challenging soil conditions, Soilmec has designed the “HDD” (Hose Drums Design) hydromill configuration. Hydraulic and mud winders are positioned on a base carrier, allowing high depth drilling performances.The new SC-135 Tiger is designed for a perfect job site suitability, allowing to work in a wide range of working radius and module rotations. The equipment features several improvements, especially in terms of safety and oil contamination, which are the result of years of drilling experience.This equipment gathers together all the best ideas put forward by job site experts who use the hydromill daily: <ul> <li>A specially-designed hydraulic system aimed at avoiding any possible breakdown due to bentonite contamination</li> <li>Easy and safe assembly</li> <li>Best access solutions for maintenance</li> <li>Highest productions performed by the new Tier4f 950 HP diesel engine</li> <li>Hose drums and cathead layout optimized to work in several working radius and module orientations</li> </ul> The SC-135, complying with CE requests of EN16228, has been conceived to offer the best possible safety solutions. The equipment presents a new safe anti-falling system, handrails and ladders, lashing points, remote control boards and reduced speed mode in order to carry out the main assembly/disassembly operations and maintenance procedures in safe conditions. Furthermore, this equipment has been designed for a modular assembly, with a max transportation weight of 45 t (106,000 lb).
    Read more

  • STM 30

    STM-30 is a drill unit designed to be fast, highly productive and easy to operate. It's a fully hydraulic drilling rig mounted on standard, heavy duty 6 x 4 truck. Thanks to its power, reliability and new configuration, the STM-30 meets with the needs for a high performance and easy to mobilize drilling rig. The application is: <strong>- <a href="http://www.soilmec.com/en/viewdoc.asp?co_id=3596">LDP</a></strong> deep uncased bored piles stabilized by drilling fluid or dry hole.
    Read more

  • SC-120 HD

    The <strong>SC-120 HD</strong> crawler mounted crane has been designed meeting the advantage of being dedicated and multifunctional at the same time. It can be used to work with hydromills, crane attachments, vibrators, hydraulic and mechanical grabs, etc. <strong>Main features:</strong> - Multi element lattice boom - Boom hoist by multiple reeving winch - Engine CAT 18 - Comfortable operator cab - Mechanical and hydraulic fittings for casing oscillator - Removable and self-assembling tracks - Controlled descent or free fall type winches - Multi element self-lifting counterweight
    Read more