SM-16GT

Call for price

SM-16GT responds to the demand of geothermal systems drilling between 100 and 250 metres.
The equipment’s characteristics mean it can satisfy 70% of demand from the low-enthalpy geothermal sector. The compact drilling rig has a rubber tracked, 2300 mm-wide carriage and very low ground bearing pressure (0.65 Kg/cm2), thereby minimising damage to private property (gardens and courtyards) where domestic geothermal energy is used.

The drilling rig is equipped with fixed kinematic mechanism with a wide section mast, half-cylinder pull/push and a 19.5 ton pull capacity and 9.8 ton push power.

The rig is designed for rapid manoeuvring (0.2÷0,6 m/sec) and has a 200 kW, 2400 rpm diesel engine adapted to power the double rotary (upper 1100 daNm – bottom 3200 daNm), triple clamp and magnetic loading system to simultaneously manoeuvre rods/casings.

To keep weight to a minimum the drilling rig is not fitted with heavy and bulky casing/rod storage and is instead accompanied by an autonomous motorised rack system during operation.

Categories: , , ,
Diesel Engine 176 kW
Max. Hoist  200 kN
Weight 15-17 t
Visitors Counter : 9

Reviews

There are no reviews yet.

Be the first to review “SM-16GT”

Your email address will not be published. Required fields are marked *

Related products

  • SC- 80 HD

    <strong>SC-80</strong> is a Soilmec crane with an <strong>electro-hydraulic proportional control </strong>system that provides accurate and simultaneous movements. Regarding performance, the maximum capacity is 80 tons with a working radius of about 3.5 m; the diesel engine power (205 kW) and the hoisting force (178 kN) are greater than those of the main competitors’ cranes. Another advantage is the <strong>new Soilmec cab</strong>, very comfortable for the operator and, especially, its innovative control panel. Finally, we have to highlight the different possible operating configurations (crane, hydraulic grab, cable grab, hydraulic rotary, dragline, etc.), which allow the SC-80 to be suitable for a large range of building yards.
    Read more

  • SR-80

    Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions. The hydraulic drilling rig <strong>SR-80</strong> has been specially designed for suiting the following applications: -<strong> LDP</strong> cased bore piles with casing driven directly by rotary head or optionally by casing oscillator powered by the base carrier itself; -<strong> LDP</strong> deep uncased bored piles stabilized by drilling fluid or dry hole; - <strong>CFA</strong> (Continuous Flight Auger) piles by means of long auger string;
    Read more

  • SR-30

    Soilmec rigs are self-mounting, easily transportable and designed to giving the best drilling solutions. The hydraulic drilling rig SR-30 has been specially designed for suiting the following applications: - LDP cased bore piles with casing driven directly by rotary head; - LDP deep uncased bored piles stabilized by drilling fluid or dry hole; - LHR (Low Head Room) – large diameter bored piles; - CFA (Continuous Flight Auger) piles by means of long auger string. The SR-30 is equipped with the DRILLING MATE SYSTEM (DMS) on 12' touch screen for monitoring and control of the rig performances and operating parameters.
    Read more

  • SF-50

    The<strong> SF-50 </strong>drilling rig, is the evolution of the already existing equipment dedicated to Continuous Flight Auger drilling technique. The upper structure of the <strong>SF-50 </strong>is mounted on Soilmec base carrier and has been designed to perform: - <a href="http://www.soilmec.com/en/products/cfa_piling_rigs/viewdoc.asp?co_id=3600">CFA</a> (Continuous Flight Auger) piles by means of long auger string. The <strong>SF-50</strong> is equipped with the DRILLING MATE SYSTEM (DMS) on 12' touch screen for monitoring and control of the rig performances and operating parameters.
    Read more