Water Well & Multipurpose Rigs
Water wells, mining exploration, seismic use, geothermal exploitation, geological investigation, well servicing, micropiling
Drillmec manufactures a wide range of waterwell rigs, multipurpose rigs and equipments for water well drilling, well development and geological surveys that have been successfully operating all over the world.
Drillmec rigs are either hydraulic or mechanical and are designed and manufactured according to a large selection of configurations and different solutions.
In order to cover most of drilling sector needs, Drillmec offers varied solutions and products besides the complete rigs, including rotary drilling equipment and consumables, rotary and hammer drilling equipment, drill pipes, drill collars and casing, drilling accessories, as long as training and long-term technical assistance on site, for maintenance and exploitation of drilling rigs.
Related products
-
Pipe Handling Equipment
Every rig operator is looking for greater efficiency and safer operations at the same time. Drillmec automated Pipe Handling Equipment accomplishes both in easy to operate and extremely reliable equipment. Power Catwalk & Pipe Shuttle Power Catwalk / Pipe Shuttle are the devices used for moving tubulars in complete safety from pipe racks to drill floor. Bridge Crane Racker Bridge Crane Racker is mounted on runway beams installed inside of the derrick, over the racking area. The lifting arm, equipped with a clamp, can be extended into the path of the traveling equipment and can handle various tubular sizes. The arm is equipped with a safety shear pin and safety cable to prevent damage should a collision occur. The racker can move the tubulars from racking board to well center, and viceversa. The bridge, 200 degree slewing and trolley functions are driven by rack and pinion drives and powered by rig hydraulic power. The control panels will be integrated into: derrick man cabin, driller’s control panel and driller’s assistant control panel. The Bridge Racker controls are configured such that the Racker can be run from a joystick controller on the derrick man control cabin or manually with the manually operated hydraulic controls in the derrick man control cabin, should there be any problems with the electrical controls. The system will be furnished with a complete zone management system to prevent collision between handler elements and travelling equipment. The Bridge Racker uses electrical components suitable for operation in Zone 2.Read more -
SF 162 Marina Master Dredger
Italdraghe is specialised in the design and production of special purpose dredgers such as Marina Master, able to easily dredge under marinas’ pontoons.Read more -
Auxiliary Equipment
<div class="first column"> Drillmec product line can also offer different auxìliary Equipment, such as: <strong>Drilling Fluid Equipment – Mud System, Bulk Storage and Transfer, Mud Tanks, Mud Guns, Mud Monitoring, Seawater Cooling Units </strong> DRILLMEC designs and manufacture complete mud and bulk systems to be integrated into a complete DRILLMEC drilling package to offer a full integrated solution. DRILLMEC offering and portfolio includes standardized solutions as well as tailor made ones in accordance to specific needs and project requirements. <strong>Skidding Systems </strong> DRILLMEC Skidding Systems are designed and tailor made according to specific drilling rig configuration,  operational requirement and overall well slots to be covered. DRILLMEC Skidding Systems portfolio include the conventional models:Gripper Jack type <ul> <li>Ratchet Jack</li> <li>Lift & Roll</li> </ul> Combined with some unconventional skidding solutions for special applications : <ul> <li>Walking Systems</li> <li>Rotating Hydraulic Driven Pivoting Wheels</li> </ul> Main characteristics taken into consideration where designing a skidding systems are the following main ones: capping beams size, distance between the wells, directions to cover, capping beams maximum allowable pressure and overall skidding capacity. <strong>HPU </strong> Hydraulic power unit (HPU) is a critical part of a rig and all its operations. DRILLMEC with its experience in Hydraulic Rigs and Hydraulic Equipmnet is capable to offer a wide range of hydraulic power units suitable to meet any customer application, international standard and capable to feed from individual equipment to complete drilling packages. <strong>Air Unit</strong> DRILLMEC air units are designed and tailor made in accordance to package requirements and pneumatic consumers on board of the drilling package. <strong>Hydraulic Cathead</strong> DRILLMEC Jack type hydraulic cathead system is composed by: hydraulic cylinder with wire line  consisting of cylinder with backup post, anchor Adapter, </div> <div class="last column"> <p class="split">and wireline assembly.</p> <strong>Top Drive and Travelling Block Retractable Dolly</strong> DRILLMEC Dolly and block Retract Systems are designed both Top Drives and Travelling blocks in order to increase tripping speed and optimize drilling efficiency. The Retractlable Dolly System is a custom designed parking system, specifically engineered to be integrated with derrick structures and drill floor arrangements on offshore rigs. </div>Read more -
Top Drives
<div class="row productDescription"> <div class="col-sm-12"> <div id="descr-1" class="descr"> <div class="first column"> <strong>Hydraulic Top Drives</strong>Drillmec manufactures a full range of hydraulic top drives. Drillmec HTD series top drives can be fitted to almost any rig in order to increase the performance and help in operations such as directional or horizontal drilling. Drillmec designs top drive rails and torque tube starting from drawings of the customer rig or from data collected by </div> <div class="last column"> <p class="split">our technicians directly on the rig field. The torque tube provide the connection between the new HTD top drive and the existing rig. The HTD top drive is supplied with an independent hydraulic power pack and controls and with a transportation cradle designed to hold it and help in moving.</p> </div> <strong>Electric Top Drives</strong> </div> </div> </div> <div class="row productDescription"> <div class="col-sm-12"> <div id="descr-2" class="descr"> <div class="first column"> In the oil & gas industry top drive technology is used to increase performance and safety; from Drillmec solid experience in manufacturing hydraulic pipe handling and top drives, we introduce the ETD Series. The Drillmec Electric Top Drive is designed as transportable as well as permanent installed unit for deep drilling rigs with different mast types. The System is powered by an AC motor. The ETD Series is controlled by a separate control panel. <div class="first column"> The standard Top Drive version includes the following items: </div> <div class="last column"> <ul class="split"> <li class="split">Standard washpipe</li> <li>Link-tilt-system with position monitoring designed for high impacts</li> <li>Remote-controlled and manual IBOP</li> <li>Backup Clamp to make up and break the Top Drive drill pipe connection</li> <li>Guide rail system inducing the torque within the mast</li> <li>Electrical service loop</li> <li>Suitable for installation on any kind of mast and derrick</li> <li>Hanger assembly with integrated Counterbalance cylinders</li> </ul> </div> </div> </div> </div> </div>Read more
Reviews
There are no reviews yet.